RX200 Industrial Cellular Router

Overview

RX200P is an advanced 5G Gateway with the capability to support worldwide LTE mobile networks with extremaly higher speed and lower latency, 1 WAN/LAN FE port, 1 LAN FE port, strong hardware interface scalability and reliablity, power industry level EMC protection.It has been widely used in CCTV, live streaming, port construction, unmanned control operations, power grids, petrol cars, unmanned driving, remote medical diagnosis, ambulances, big data transmission, live video and other related scenarios.

Hardware

Front View

Side View

Power Socket

Mobile
Mobile module
LTE-FDD: 150Mbps (DL) /50Mbps(UL); LTE-TDD: 130Mbps (DL) / 30Mbps (UL); DC-HSPA+: 42Mbps (DL)/5.76Mbps (UL), WCDMA:384 (DL)/384 (UL)
Status
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS
autoreply, SMPP
Black/White list
Operator black/white list
Band management
Band lock, Used band status display
APN
Auto APN
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
Dual PDN
Possibility to use different PDNs for dual network access and services (not available in standard FW)
Wireless
Wireless mode
IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi security
WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID
SSID stealth mode and dual SSIDs
WiFi users
Up to 64 simultaneous connections
Wireless Hotspot
Hotspot captive portal with customizable landing page(Optional), internal/external Radius server
Ethernet
WAN
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Network
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6.
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP,
MQTT, Wake On Lan (WOL)
Connection monitoring
TCP-Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
Port forward, traffic rules, custom rules
DHCP
Static and dynamic IP allocation, DHCP Relay, Relayd
QoS
Speed control of physical interface: WAN, LAN, Modem
DDNS
7 service providers, others can be configured manually
Network backup
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancing
Balance your internet traffic over multiple WAN connections
Security
Authentication
Pre-shared key, digital certificates, X.509 certificates
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN,SYN-RST, NULL
flags, FIN scan attacks)
VLAN
Port and tag based VLAN separation
Mobile quota control
Set up custom data limits for the SIM card
WEB filter
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control
Flexible access control of TCP, UDP, ICMP packets, MAC address filter.
VPN
OpenVPN
Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-
CBC
IPsec
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE
GRE tunnel
PPTP, L2TP
Client/Server services can run simultaneously
N2N
N2N VPN*
ZeroTier
ZeroTier VPN*
WireGuard
WireGuard VPN client and server support*
Modbus TCP Slave
ID filtering
Respond to one ID in range [1;255] or any
Allow Remote Access
Allow access through WAN
Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave
functionality
Modbus TCP Master
Supported functions
01, 02, 03, 04, 05, 06, 15, 16
Supported data formats
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus Data To Server
Protocol
HTTP(S), MQTT, Azure MQTT, ThingsBoard
MQTT Gateway
MQTT gateway
Allows sending commands and receiving data from Modbus Master through MQTT broker
Monitoring & Management
WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA
Firmware update from sever, automatic notification
SSH
SSH (v1, v2)
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call
Reboot, Status, WiFi on/off, Mobile data on/off, Output on/of
TR-069
OpenACS, EasyCwmp, Friendly tech
MQTT
MQTT Broker, MQTT publisher
SNMP
SNMP (v1, v2, v3), SNMP trap
JSON-API
Management API over HTTP/HTTPS
MODBUS
MODBUS TCP status/control
Management Platform
RELIX Remote Management System (RRMS)
IoT Platforms
Reactor Cloud
Remote monitoring, Remote management, Remote access, Remote control.
Azure IoT Hub
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial,
Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type,
Temperature, PIN count to Azure IoT Hub server(to be released)
System Characteristics
CPU
MIPS@580MHz
RAM
128MB, DDR2
FLASH storage
16 MB, SPI Flash, EMMC Optional
Firmware/ Configuration
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA
Update FW/configuration from server
RMS
Update FW/configuration for multiple devices
Keep settings
Update FW without losing current configuration
Firmware Customization
Operating system
REOS(OpenWRT based)
Supported languages
Busybox shell, C, C++
Input/Output
Input
Null
Output
PSE 48V Optional
Events
SMS, EMAIL, Reactor Cloud
Power
Connector
DC Jack socket(By Default)
Input voltage range
5 – 48 V DC(without PSE), PSE 48V DC reverse polarity protection
PoE&PSE
802.3at, 48V DC
Power consumption
About 210mA@12V DC, About 560mA@12V DC
Physical Interfaces(Ports, LEDs, Antennas, Buttons, SIM)
Ethernet
2 x RJ45 ports, 10/100Mbps
I/Os
Null
Serial ports
Null
Status LEDs
1 x Power LED, 1 x Cellular LED, 1 x Signal LED, 1xWi-Fi LED.
SIM
1 x SIM slot, 1.8 V/3 V, Drawer type SIM holders
Power
4 pin microfit connectorby default, DC Jack Connector optional
Antennas
1/2 x SMA for Mobile Netwrok, 1 x SMA WiFi antenna connectors, 1 GPS antenna connector(Optional).
Reset
1x Reboot/Factory reset button
Physical Specification
Casing material
Aluminum Alloy housing with DIN rail mounting option
Dimensions (W x H x D)
143.55 x 108 x 49.35 mm
Weight
130 g
Mounting options
sideways DIN rail mounting slots
Operating Environment
Operating temperature
-40℃ to 85℃, -30~ +75℃
Operating humidity
10 % to 95 % non-condensing
Ingress Protection Rating
IP30
Regulatory & Type Approvals
Regulatory
CE/RED, RCM, RoHS, NBTC
EMI Immunity
Standards
ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09)
Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
ESD
EN61000-4-2:2009
RS
EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT
EN 61000-4-4:2012
Surge immunity(AC Power Line)
EN 61000-4-5:2006
Surge immunity(Ethernet ports)
EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS
EN 61000-4-6:2009
DIP
EN 61000-4-11:2004
RF
Safety
Standards
EN 62368-1:2020+A11:2020
AS/NZS 60950.1:2015
EN 55032:2015/A11:2020
EN 55035: 2017/A11: 2020

Secure and reliable internet access

  • 4G mobile network support
  • Seamless reliable communications
  • Multiple VPN tunnels for data encryption
  • Auto failover/link backup

Easy to use and easy maintenance

  • User friendly web interface for user interaction remote
  • Management platform
  • Software define LAN access for an easier maintenance
  • Hardware watchdog & auto recovery

Designed for industrial usage

  • Power input range 5 to 48V DC
  • Industrial design for harsh environment
  • Aluminum housing and din-rail mounting
  • -40 ~ +75 Celsius degree working temperature

Physical Interfaces and performance

  • 1Reset button(pin hole)
  • 2×FE Ports, 1×WAN/LAN, 1×LAN
  • 1×SIM slot

Related Products

Register Complaint