RX380C Industrial Dual SIM Cellular Router
Overview
RX380C is an advanced 4G dual SIM router with the capability to support worldwide 4G mobile networks with extremaly higher speed and lower latency, 1 port WAN/LAN and 1 port LAN, strong hardware interface scalability and reliablity, power industry level EMC protection.It has been widely used in CCTV, live streaming, port construction, unmanned control operations, power grids, petrol cars, unmanned driving, remote medical diagnosis, ambulances, big data transmission, live video and other related scenarios.
HARDWARE
FRONT VIEW
SIDE VIEW
POWER SOCKET
Mobile
Mobile module
LTE-FDD: 150Mbps (DL) /50Mbps(UL); LTE-TDD: 130Mbps (DL) / 30Mbps (UL); DC-HSPA+: 42Mbps (DL)/5.76Mbps (UL), WCDMA:384 (DL)/384 (UL)
Status
Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS
autoreply, SMPP
autoreply, SMPP
Black/White list
Operator black/white list
Band management
Band lock, Used band status display
APN
Auto APN For Public SIM
Bridge
Direct connection (bridge) between mobile ISP and device on LAN
Passthrough
Router assigns its mobile WAN IP address to another device on LAN
Dual PDN
Possibility to use different PDNs for dual network access and services (not available in standard FW)
Wireless
Wireless mode
IEEE 802.11b/g/n, Access Point (AP), Station (STA)
WiFi security
WPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
SSID
SSID stealth mode and dual SSIDs.
WiFi users
Up to 64 simultaneous connections
Wireless Hotspot
Hotspot captive portal with customizable landing page(Optional), internal/external Radius server
Ethernet
WAN
1 x WAN port (can be configured to LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
LAN
4 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
Network
Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, RIPng, OSPF6.
Network protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet client, SNMP,
MQTT, Wake On Lan (WOL)
MQTT, Wake On Lan (WOL)
Connection monitoring
TCP-Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall
Port forward, traffic rules, custom rules
DHCP
Static and dynamic IP allocation, DHCP Relay, Relayd
QoS
Speed control of physical interface: WAN, LAN, Modem
DDNS
7 service providers, others can be configured manually
Network backup
VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover
Load balancing
Balance your internet traffic over multiple WAN connections
Security
Authentication
Pre-shared key, digital certificates, X.509 certificates
Firewall
Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, NULL
flags, FIN scan attacks)
flags, FIN scan attacks)
VLAN
Port and tag based VLAN separation
Mobile quota control
Set up custom data limits for the SIM card
WEB filter
Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only
Access control
Flexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPN
Multiple clients and server can be running simultaneously, 12 encryption methods
OpenVPN Encryption
DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-
CBC
CBC
IPsec
IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
GRE
GRE tunnel
PPTP, L2TP
Client/Server services can run simultaneously
ZeroTier
ZeroTier VPN*
WireGuard
WireGuard VPN client and server support*
Modbus TCP Slave
ID filtering
Respond to one ID in range [1;255] or any
Allow Remote Access
Allow access through WAN
Custom registers
MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave
functionality
functionality
Modbus TCP Master
Supported functions
01, 02, 03, 04, 05, 06, 15, 16
Supported data formats
8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
Modbus Data To Server
Protocol
HTTP(S), MQTT, Azure MQTT
MQTT Gateway
MQTT gateway
Allows sending commands and receiving data from Modbus Master through MQTT broker
Monitoring & Management
WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log
FOTA
Firmware update from sever, automatic notification
SSH
SSH (v1, v2)
SMS
SMS status, SMS configuration, send/read SMS via HTTP POST/GET
Call
Reboot, Status, WiFi on/off, Mobile data on/off, Output on/of
TR-069
OpenACS, EasyCwmp, Friendly tech
MQTT
MQTT Broker, MQTT publisher
SNMP
SNMP (v1, v2, v3), SNMP trap
JSON-API
Management API over HTTP/HTTPS
MODBUS
MODBUS TCP status/control
Management Platform
RELIX Remote Management System (Reactor Cloud)
IoT Platforms
Reactor Cloud
Remote monitoring, Remote management, Remote access, Remote control.
Azure IoT Hub
Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial,
Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type,
Temperature, PIN count to Azure IoT Hub server(to be released)
Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type,
Temperature, PIN count to Azure IoT Hub server(to be released)
System Characteristics
CPU
MIPS@580MHz
RAM
128MB, DDR2
FLASH storage
16 MB, SPI Flash, EMMC Optional
Frimware/ Configuration
WEB UI
Update FW from file, check FW on server, configuration profiles, configuration backup, restore point
FOTA
Update FW/configuration from server
RMS
Update FW/configuration for multiple devices
Keep settings
Update FW without losing current configuration
Firmware Customization
Operating system
REOS(OpenWRT based)
Supported languages
Busybox shell, C, C++
Input/Output
Input
DC 12V
Output
Null
Events
SMS, EMAIL, RELIX Reactor
Power
Connector
4 pin microfit power socket or DC Jack socket(By default)
Input voltage range
12 VDC, reverse polarity protection
PoE&PSE
Null
Power consumption
About 210mA@12V DC, About 560mA@12V DC
Physical Interfaces(Ports, LEDS, Antennas, Buttons, SIM)
Ethernet
2 x RJ45 ports, 10/100Mbps
I/Os
1x DI, 1x DO
Serial ports
1 x RS232, 1 x RS485
Status LEDs
1 x FE1 LED, 1 x FE1 LED, 1 x WLAN LED, 1xSIG LED, 1 x CEL LED, 1SYS LED
SIM
2 x SIM slot, 1.8 V/3 V, external SIM holders
Power Socket
DC Jack Connector by default, 4 pin microfit connector Optional
Antennas
1/2 x SMA for Mobile Netwrok, 1 WiFi antenna connectors, 1 GPS antenna connector(Optional)
Reset
1x Reboot/Factory reset button
Physical Specification
Casing material
Metal housing with DIN rail mounting option
Dimensions (W x H x D)
98.8*97.7*24.4 mm
Weight
244 g
Mounting options
sideways DIN rail mounting slots
Operating Environment
Operating temperature
-40℃ to 85℃(Storage), -30~ +75℃(Woring)
Operating humidity
10 % to 95 % non-condensing
Ingress Protection Rating
IP30
Regulatory & Type Approvals
Regulatory
CE/RED, RCM, RoHS, NBTC
EMI Immunity
Standards
ETSI EN 301 489-1 V2.23(2019-11), ETSI EN 301 489-17 V3.2.4(2020-09) Draft ETSI EN 301 489-52 V1.1.2 (2020-12)
ESD
EN61000-4-2:2009
RS
EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT
EN 61000-4-4:2012
Surge immunity(AC Power Line)
EN 61000-4-5:2006
Surge immunity(Ethernet ports)
EN 61000-4-5:2014, clause 7.1 of ITU-T K21
CS
EN 61000-4-6:2009
DIP
EN 61000-4-11:2004
RF
Safety
Standards
EN 62368-1:2020+A11:2020
AS/NZS 60950.1:2015
EN 55032:2015/A11:2020
EN 55035: 2017/A11: 2020
AS/NZS 60950.1:2015
EN 55032:2015/A11:2020
EN 55035: 2017/A11: 2020
Typical Application
Secure and reliable internet access
- 4G mobile network support seamless reliable
- Communications
- Multiple VPN tunnels for data encryption
- Auto failover/link backup
Easy to use and easy maintenance
- User friendly web interface for user interaction
- Reactor remote management platform
- Software define LAN access for an easier maintenance
- Hardware watchdog & auto recovery
Designed for industrial usage
- Power input 12V DC
- Industrial design for harsh environment
- Metal housing and din-rail mounting
- -40 ~ +70 celsius degree working temperature
Physical Interfaces and performance
- 1*RS232, 1*DI, 1DO
- 1*WAN/LAN, 1*LAN
- WIFI(optinal)
- Dual SIM slot
Related Products
Overview RX100 is an advanced 5G Gateway with the capability […]
Overview RX400S is an advanced 5G Gateway with the capability […]